Eegee's #26

Violations (3)

• b1d62620-85c0-4d33-a2f6-edb108e28b21CriticalCorrected on site

  Adequate handwashing sinks, properly supplied and accessible

  5-205.11 (A) A HANDWASHING SINK shall be maintained so that it is accessible at all times for EMPLOYEE use. Observed equipment such as metals containers placed inside handwashing sinks upon arrival.

  Preventing Contamination by Hands

• 4f6dff17-b576-4b4e-b5b4-33294d71cc44Corrected on site

  Proper cooling methods used; adequate equipment for temperature control

  3-501.15 (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3) Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods. Observed food containers of prepared salads, tomatoes, and chopped chicken placed in a cold holding make-unit refrigerator to cool down, PIC stated items are placed here after being sliced to cool them down and hold. thermometer read a temperature of greater than 41F.

  Food Temperature Control

• 6a7a14f6-8188-436d-b926-342ae36e24e8

  Utensils, equipment & linens; properly stored, dried, & handled

  4-901.11 After cleaning and SANITIZING, EQUIPMENT and UTENSILS: (A) Shall be air-dried or used after adequate draining as specified in the first paragraph of 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (food-contact surface SANITIZING solutions), before contact with FOOD; and Observed clean equipment and utensils inside containers with pooling water.

  Proper Use of Utensils