CleanPlate.aiBrowse all areas

Restaurant backflow violations, explained for plumbers

A restaurant backflow violation means the inspector found a place where contaminated water could be pulled into the potable supply. On the job that often looks like a missing vacuum breaker, the wrong device on a pressurized line, a missing air gap, or a mop sink hose with no breaker. Those findings are public. Health departments publish the visit date, the address and what the inspector wrote. Recent backflow citations are one of the clearer signals that a kitchen needs a licensed plumber before the next visit.

This page covers what those citations mean on site. For leaks, no hot water, clogged drains and the rest of the plumbing list, see the restaurant plumbing violations guide. To pull a local list, go to plumbing reports.

What backflow protection is supposed to do

Backflow is water flowing the wrong way in a pipe. In a food establishment that can pull dirty water, chemicals or food waste toward the drinking water system. The FDA Food Code 2022, Chapter 5, treats this as a plumbing control.

Three sections matter most:

  • 5-202.13 Backflow Prevention, Air Gap. An air gap between the water supply inlet and the flood level rim must be at least twice the diameter of the inlet and may not be less than 1 inch (25 mm).
  • 5-202.14 Backflow Prevention Device, Design Standard. A backflow or backsiphonage device must meet American Society of Sanitary Engineering (ASSE) standards for that specific application and type of device.
  • 5-203.14 Backflow Prevention Device, When Required. The plumbing system must preclude backflow of a solid, liquid or gas contaminant into the water supply at each point of use, including on a hose bibb if a hose is attached, or on a hose bibb if a hose is not attached and backflow prevention is required by law. The fix is an air gap under 5-202.13 or an approved device under 5-202.14.

Local health codes often track that wording. Exact section numbers and ASSE device types still differ by city, so read the inspector's observation before you bid.

The citations plumbers actually see

  • Missing vacuum breaker. A hose bibb, faucet spout or mop sink connection that needs a vacuum breaker has none. Southern Nevada Health District's mop sink backflow guidance is a clear example of how departments talk about atmospheric vacuum breakers on mop sink hose setups.
  • Wrong device under continuous pressure. Atmospheric vacuum breakers are generally for intermittent use. If a downstream shutoff leaves the device pressurized for long stretches, that device may not be the right ASSE-rated product. Food Code 5-202.14 requires a device that meets the standard for that application. Do not invent a local code number from memory.
  • Missing air gap. A drain line, spray hose or fill line that dips below the flood rim without the required gap shows up at dish machines, ice machines, prep sinks and beverage equipment. Food Code 5-202.13 sets the minimum.
  • Hose on a mop sink without a breaker. A hose left on a service sink faucet with no approved breaker is a classic cross-connection write-up. Food Code 5-203.14 calls out hose bibbs. Fixing it is plumbing work.

The inspector's written observation tells you whether you are replacing a breaker, correcting an air gap or swapping a continuous-pressure assembly.

What is plumbing work, and what is not

Treat these as plumbing calls when the citation is about protecting the water supply:

  • Installing or replacing a vacuum breaker or other approved backflow device
  • Correcting an air gap on a drain or supply connection
  • Repairing or replacing the hose bibb, faucet or connection that failed inspection

Leave these out of a plumbing prospecting list:

  • Grease trap odors
  • Soap or towel dispensers
  • Handwashing signs
  • Thawing food under running water
  • Door gaps

CleanPlate's plumbing reports already filter to plumbing-relevant findings.

Why owners call, and why timing matters

A backflow citation is rarely something to ignore until next year. The kitchen may still be open, but the owner has a written finding that needs a licensed fix before a follow-up visit. Reinspection timing varies by department. A plumber who already knows what the inspector wrote has a clearer reason to call than a cold pitch.

Confirm the need before you bid. A later inspection does not always prove the problem is gone. A short note that names the citation beats a generic flyer.

Where CleanPlate covers plumbing

CleanPlate plumbing reports cover 15 areas:

  • Miami-Dade County, FL
  • Broward County, FL
  • Palm Beach County, FL
  • City of Dallas, TX
  • Tarrant County Health, TX
  • Chicago, IL
  • Kansas City, MO
  • Jackson County Health, MO
  • City of St. Louis, MO
  • Fulton County, GA
  • Cobb County, GA
  • Gwinnett County, GA
  • Polk County, IA
  • Linn County, IA
  • Scott County, IA

New York City is not covered for plumbing. How often the data refreshes depends on the area, anywhere from nightly to monthly. Chicago inspection data is modified for use from its original source, www.cityofchicago.org, and the City of Chicago makes no claims about its content, accuracy, timeliness or completeness.

How the report works

  1. Pick your area on the plumbing page.
  2. Preview the count. You will see how many venues qualify and up to five of them.
  3. Buy the full report. The full report is $29.99. You get a PDF for one covered area with at least 25 cited venues, each qualifying citation, a ZIP breakdown and a link to each venue's CleanPlate record.

The report window starts at the last 30 days. If an area needs more time to reach 25 venues, it extends to 60 or 90 days. You will see the actual window and the mix of issues.

If you want ongoing leads, reply about a weekly emailed brief of new local inspections with plumbing problems. That brief is paid monthly. Pricing is set when you ask.

Using the list responsibly

The report is a prospecting aid from public inspections. It shows what an inspector wrote on a given day. It does not confirm the current condition of the building, who services it, who to contact or whether the owner wants to buy. Contact details are not included. Treat each venue as worth a respectful call or visit, not a sure thing.

FAQ

What is a restaurant backflow violation?
A finding that the water supply is not protected from contamination at a point of use. Common forms are a missing vacuum breaker, the wrong device under continuous pressure, a missing air gap, or a mop sink hose without a breaker.

What does the FDA Food Code say about air gaps?
Section 5-202.13 requires an air gap of at least twice the water-supply inlet diameter and not less than 1 inch (25 mm).

Is a mop sink hose without a vacuum breaker plumbing work?
Yes. Protecting that connection with an approved device is plumbing work. Dispensers, signs and grease trap odors are not.

Which areas does CleanPlate cover for plumbing?
The 15 areas listed above. New York City is not covered for plumbing.

What is in the full plumbing report?
A PDF for one covered area with at least 25 cited venues, each qualifying citation, a ZIP breakdown and a link to each venue's CleanPlate record. The preview is free. The full report is $29.99.

Is the weekly email separate from the report?
Yes. The full area report is $29.99 once. A weekly emailed brief of new local plumbing inspections is paid monthly. Pricing for the brief is set when you reply about it.

See who was cited near you

Pick your county, see how many venues were cited for plumbing problems (including backflow findings) and preview five of them for free. The full report is $29.99. For ongoing leads, ask about the weekly plumbing brief.

See your area · Restaurant plumbing violations guide · Restaurant no hot water violations

Sources